Manufacturer of All Type of Valves

Valves for Technical and Medical Gases

Key Operated Valves in Packed Design
(IHO-06, IVO-06)

Key Operated Valves in 'O' Ring Seal Design
(KHO-10, KVO-10)

Wheel Operated Valves in 'O' Ring Seal Design (IHO-10, IVO-10)

Wheel Operated Valves in 'O' Ring Seal Design ( CWH-10/O & CWV-10/O)

Valves for Liquefiable and Corrosive Gases

Key Operated Chlorine, Refrigerant & Other Liquefiable Gas Cylinder Valves (CAV-06)

Chlorine and Hydrogen Fluoride Valves in Two Pcs Spindle Design (CAV-04)

Valves for Dissolved Acetylene

Key and Wheel Operated Valves in 'O' Ring Seal Design (MKH-10/D, CWH-10/D)

Valves for Marine Lighting Installations
(IHO-03)

CNG Valves for Automotic Use

Wheel Operated Valves (ALV-11)

Knob Operated Valves (AHV-02)

Valves for Refrigerant Gases

Twin Phase Valves (RDP-03)

Valves for Small Cylinders (RSK-06, RSW-11)

Steel Gas Cylinder Valves

Wheel Operated Valves (CST-11)

Key Operated Valves (CST-06)

Valves for Breathing Apparatus

Breathable Air Valves (MBA-10)
Breathable Air Valves (HBA-10)
Pressure Reducer Valves (PRV-07)

Pin Index Valves for Medical Gas

Knob Operated Valves (MYC-10A)
Post, Knob & Toggle Operated Valves
(MYC-10B)
New Generation Valves (MYC-10C)
Key Operated Valves (MYC-11)

Valves for Carbon Dioxide

Squeeze Grip Fire Fighting Valves
(FSG-07/F, FSG-07/S)
Wheel / Key Operated Valves
(FWT-11, FWS-11, FKS-11)
Key and Wheel Operated Valves in 'O' Ring Seal Design (MKH-10/C & CWH-10/C)
Puncture Type Valves (FSV-08)
Actuator / Pressure Operated Valves
(FSV-01)

Residual Pressure Valves

Wheel Operated Residual Pressure Valve for Inert and High Purity Gases (CRPV-10/WN & CRPV-10/WO)

Spares for Cylinders & Ton Containers

Fusible Plug, Blind Plug and Couplings for Cylinders and Ton Containers

 


 

Valves for Carbon Dioxide

Squeeze Grip Fire Fighting Valves
 

Product Features

  • Valves designed for low back-pressure at the time of carbon dioxide release.

  • Valves available in both Front and Side outlet configuration.

  • Body with integral bracket to mount cylinder to the wall.

  • Good aesthetic finish ensured for office / home application.

  • Valve meets discharge requirements of IS 2878:2004 for fire fighting cylinders.

  • Valve tapped 1/8 BSP for dip tube fitment.

  • Orifice diameter : 8 mm.

Series : FSG-07/F

 


Material of Construction
Item No. Description Materials
01. Valve Body Forged Brass to IS : 8737
02. Dip Tube Holder Free Cutting Brass to IS: 319 (Grade I)
03. Spring Stainless Steel
04. Seat Holder Free Cutting Brass to IS:319 (Grade I)
05. Soft Seating Nitrile Rubber
06. Spindle Free Cutting Brass to IS:319 (Grade I)
07. Lever - Bottom MS Sheet (Powder Coated Black)
08. Lever - Top
09. 'O' Ring Nitrile Rubber
10. Lever Pin Brass (Chrome Plated)
11. Retainer Plug Free Cutting Brass to IS:319 (Grade I)
12. Safety Disc Copper C 101
13. Safety Disc Washer Nylon 66
14. 'O' Ring Nitrile Rubber
15. Lock Pin MS (Chrome Plated)
16. Lock Pin Chain PVC Rubber
 
 

Series : FSG-07/S

 
 

 

 

© Copyright 2009, Tekno Valves. All Rights Reserved
Best viewed in 1024 x 768 resolution
Hosted & Maintained by
Shivam E-Commerce