International Homologation
Cylinder valve designs are tested to relevant ISO standard by an ISO 17025 accredited test laboratory, resulting in Type approval certificate issued by the European/UK notified body.
The combination of type approval and periodic audits form the basis of the Authorization Certificate, which lists all the type approval certificates covered under the scope of TPED / TPE directives. Our In-house Inspection agency, authorized by the Notified body, is responsible for the surveillance of manufacture and initial inspection and test for all valves.
| Product Series | Type approval certificate no. |
|---|---|
| PBN-12 | TAC-1266-361-2201 |
| SWN 12 + BOWN 12 + TWN 12 | TAC-1266-361-2301 |
| Product Series | Type approval certificate no. |
|---|---|
| BMV-09 | BAM-TPED-2016/005 |
| BSWN-12/D-30 + BAWN-12/D-30 + BSKN-12/D + BAKN-12/D | BAM-TPED-2019-008 |
| KHO-10/D + KVO-10/D | BAM-TPED-2016/013 |
| PBN-12 | BAM-TPED-2016/018 |
| RWH-03 | BAM-TPED-2015/006 |
| SKN-12/C | BAM-TPED-2016/011 |
| SSWN-22/V + SSWN-22/V-S3 | BAM-TPED-2018-003 |
| SSWN-32/V | BAM-TPED-2021/003 |
| SWN-12/45 + IWN-12/45 | BAM-TPED-2016/002 |
| SWN-22 | BAM-TPED-2015/007 |
| SWN-22/V | BAM-TPED-2017/008 |
| BHN-12/N | BAM-TPED-2022/005 |
| BSKN-12/O + BTKN-12/O | BAM-TPED-2022/001 |
| HBA-10/I + MBA-10/I + RBA-10/I +VBA-10/I | BAM-TPED-2023/003 |
| SWN-12/O + SWN-12/N + SWN-12/D + TWN-12/O + TWN-12/D + BOWN-12/O + BOWN-12/N | BAM-TPED-2017/003 |
| SWN-12/C + IWN-12/C + BOWN-12/C | BAM-TPED-2016/008 |
| BSKM-21/O | BAM-TPED-2022/023 |
| BPKN-12 + BTKN-12 | BAM-TPED-2022/010 |
| BSWN-32/L | BAM-TPED-2022/003 |
| CAV-06 | BAM-TPED-2023/020 |
| BSWN-12/O | BAM-TPED-2025/001 |
National Homologation
The Petroleum and Explosives Safety Organization (PESO) is the Indian statutory body responsible for the approval of gas cylinders, valves and regulators. PESO appoints third party inspection agencies for prototype and batch-wise inspection of cylinder valves.
Our cylinders valves supplied for the Indian market are approved by PESO and duly inspected by BIS or Lloyds Register as per Indian or International standards.
Accredited Laboratory as per ISO 17025
Chemical
Mechanical
